Watchguard VPN

[lagcat]

hello

one of our companies have brought a x550e

i have got the site-to-site vpn up and running fine

but i am having problems with the ipsec VPN's

i have created a policy using the fireboxDB
created users
installed the client
imported the wgx

connected fine using the username and password

i have a nice green bar on the VPN client

i seeem to be sending data but not receiving anything

the companies subnet is 10.60.11.0/24
the virtual IP's i set are 10.62.11.0/24

do i somehow need to set a gateway for these or something as they are difference subnets?

i have enabled logging on the policy but there is nothing coming through..i cannot even ping 10.60.11.1 which is the firebox itself

if i do a ping from the firebox to the connected client i get no reply

is there another policy i need to add? i cannot seem to get traffic to go through except the first 2kb that makes the authentication

any ideas?

CCENT, CCNA
MCP, MCSA
Comptia: Network Essentials, Security +, A+

 

[lagcat]

watchguard system manager 10.2.10
Mobile VPN 10.10 build 59

IPSEC Policy for VPN
any connections are... allowed

allowed resources... 10.60.11.0/24 172.16.0.0/16

Ports: ANY

Schedule: always on
Traffic Management: Default(no Limits)

VPN Virtual Address: 10.62.11.1-10.62.11.25
Firebox IP Address: 10.60.11.1/24


CCENT, CCNA
MCP, MCSA
Comptia: Network Essentials, Security +, A+