Watchguard 500 VPN Configuration

[Greatwillmiester]

Any help would be greatly appreciated.

Heres the setup.
DSL Modem set to bridging, attached to the WatchGuard x500 which plugs into the switch with a Windows 2003 Server.
The server has two NICs. Exchange is setup and running beautifully on the server (that took a while to figure out how to setup the Firebox to NAT to the server.) I have also configureed the Firebox to NAT in Remote Desktop (a big help since I acually work 300 miles away from the server/firebox) I get in routinely to work on the system using Remote Desktop.

We added the second NIC and statically assigned its IP and setup the VPN on the server. I cannot seem to get a VPN connection from here though (and after each attempt the firebox locks me out for half an hour on any type of connection )

Question is, how do I configure the Watchguard to allow VPN to the Windows 2003 server. Step by step would be nice.

Thanks

 

[Troxell]

I am having the same problem. I have a Cable modem and i cant get my WatchGuard III/500 to let VPN through to my Windows 2003 server.