Was replace heater bulb, now find stuck broken flag

[cruikshank]

I received instructions and very carefully replaced the halogen bulbs. Put it all back and now on post boot it comes up with: Paper Jam open Front

Hi, I'm guessing a flag broke or something else is not correct. I got the instructions, replaced the lamps, and on boot up I get a paper jam error I can't get passed. Tells me to open front panel and clear jam but there isn't one. Any ideas where to look would be greatly appreciated. Thanks, Dave

 

[cruikshank]

Running diagnostics says the paer size A sensor is the problem. Where can I get this , if this is true ?

Also what sould I look for as far as damge to this sensor ?

Thanks, Dave

 

[datchupokey]

You need a 351-1106-00

 

[cruikshank]

I was able to get it up and running by carefully gluing the flags back on. They are in a low stress envireonment and I figured it was worth trying. I had 2 flags broke, both on the upper roller assembly. A small white one and a smaller black one. Luckily they were clean breaks. So far so good.

Thanks for the help ,
Dave