WARNING: LOW DISK DISK RECS AVAIL: 0 ?

[justadivageek]

I have a Meridan Option 11c and when I complete a command in just about any load [20, 23, 95, etc] I receive the following error.

MEM AVAIL: (U/P): 2464977 USED U P: 399190 166872 TOT: 3031039
DISK RECS AVAIL: 0
WARNING: LOW DISK

Bad Hard Drive?
What do you think, Help I don't want the HD to crap out on me...

THANK YOU IN ADVANCE

 

[justadivageek]

How does one go about that?

SCH0111
TYPE adan
ADAN hist
SCH0531
ADAN 25000

SCH0531
ADAN !
>err sch0531
>OVL441 Help text not found for error code: SCH531


REQ chg
TYPE adan
ADAN hst

SCH0531
ADAN hst
SCH0531
ADAN 2

 

[justadivageek]

I have never had to do this,

REQ chg
TYPE adan
ADAN chg tty 0
TTY_TYPE SDI
CAB 00
CDNO 00
PORT 0
DES SYSTEM_TERMINAL
DES
FLOW
ENL
USER
TTYLOG
BANR

No where is HIST listed

 

[justadivageek]

>ld 117
OAM000

MEM AVAIL: (U/P): 2452215 USED U P: 399347 179477 TOT: 3031039
DISK RECS AVAIL: -24
WARNING: LOW DISK
SURVIVABILITY AVAIL: 0 USED: 0 TOT: 0
=> stat buf

CDR DIS
TRF DIS
STN DIS
Storage space on c: is empty
Not Connected

 

[yyrkroon]

REQ = CHG
TYPE = ADAN
ADAN = HST
SIZE = 10000

ENTER THRU THE REST

 

[yyrkroon]

ADAN CHG HST

SORRY BOUT THAT

 

[acewarlock]

This is one you have to play with and try different entries.

REQ CHG
TYPE ADAN
ADAN CHG HIST




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[justadivageek]

OK, the change didn't help.
Now after installing the patches we are getting the following errors:

TEMU115 Drive Full [various patches not backed up]

BERR508 HI EXC ): Completing Analysis of Task "tEntity" (0x21cbd1b4)
BERR704 EXC 0: Bus Error in Task "tEntity" (0x21cbd1b4)

 

[Sennback]

Hi,

Option 11 have problems with to many patches!!
If you have a lot of TN:s configured (that is analog, digital, dect, phantom tn:s) plus a lot of patches, you can experience this. We have seen it when you install deplists (a bunch of patches).

What yoy should do is to delete all un necessary patches.
Often patches are installed with deplists for all possible applications and problems.
Delete all necessary patchers, that is take them out of service and delete them, then make a new backup, and it will be fine.

 

[yyrkroon]

could you post your CPU info, you shouldn't be getting this error if you're using the 64MB Daughterboard.

LD 135
STAT CPU

 

[justadivageek]

Doesn't look like we have a 64 MB Daughterboard

** Option 11C CPU Status **
SRAM: 128 kBytes
DRAM: 32 MBytes
Program Store: 32 MBytes
Flash Drive: 16 MBytes
Dual fibre expansion board #1 installed.
Single fibre expansion board #2 installed.
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.

 

[yyrkroon]

what you need is the NTTK25CAE5 daughterboard

 

[justadivageek]

You know, if that is the case...we upgraded the switch about 7-8 months ago.
I am going to find out why they didn't give us the appropriate equiment.

Thank you to everyone for their help!!!!