WARNING: LOW DISK DISK RECS AVAIL: 0 ?

[justadivageek]

I have a Meridan Option 11c and when I complete a command in just about any load [20, 23, 95, etc] I receive the following error.

MEM AVAIL: (U/P): 2464977 USED U P: 399190 166872 TOT: 3031039
DISK RECS AVAIL: 0
WARNING: LOW DISK

Bad Hard Drive?
What do you think, Help I don't want the HD to crap out on me...

THANK YOU IN ADVANCE

 

[phonz1]

there is no hard drive on an 11, what is the part number on the SSC or CPU card? what release is this pbx??

 

[jgunkel]

There is no hard disk, but there is a compact flash card. That will eventually fill up.

Go through, check for traffic collection, uncollected CDR data, etc. All of these buffers will occupy space on the flash card until they are collected or cleared.

 

[justadivageek]

i know how to check the serial #, but not release version.
what is the command for that?

 

[acewarlock]

ISS




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[justadivageek]

Lovely, thank you

CALL SERVER/MAIN CAB
VERSION 2121
RELEASE 4
ISSUE 50 W +
IDLE_SET_DISPLAY

 

[acewarlock]

Your very Welcome.




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[phonz1]

What is the part number of your SSC card, include the last two letters

 

[justadivageek]

Sorry for the delay, busy afternoon.
The model # is NTDK20JA Rlse 1
We ran patch updates for the switch and still recieve the error.

 

[xtract]

are you collecting CDR? maybe call registers are occupying the space,you need to flush the buffers

 

[justadivageek]

Nope, not collecting buffers

 

[geirendre]

Whats the size of your history-buffers?

LD 22
REQ PRT
TYPE ADAN HST

Do you have alot of patches installed?

LD 21
ISSP

A MAN-INIT could free up unused disc records...

 

[justadivageek]

The hitory buffer is large, how do I clear them?

 

[acewarlock]

How large is it?




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[justadivageek]

It is THIS BIG [insert fish joke here]

Sorry, here you go!

ADAN HIST
SIZE 65000
USER MTC SCH BUG

 

[justadivageek]

So how do I flush the buffer?

 

[acewarlock]

Do a chg to ADAN HIST 25,000 and it will flush the buffer, or you could make it smaller.




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[justadivageek]

What load to CHG , because it gives me and error in 22, SCH0101

 

[acewarlock]

LD 17




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[geirendre]

LD 17
REQ: CHG
TYPE ADAN
ADAN CHG TTY X

A Hist-file size of 10000 should be enough
in most cases I think.

BTW: You have Hist-size settings on all TTY's (I think...)
not sure if you need to check/reduce all of them.