warm start /cold start reason codes

[mikeyb123]

SRPT782 RST 1: WARM START IN PROGRESS - Reason 36

SRPT781 RST 0: COLD START IN PROGRESS - Reason 5


where can I find what these mean?

its a option 81 2540B

went into a warm start loop, then went to cold start.

I'm now getting a whole load of AUD28, AUD14 and AUD21's

any clues?

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.

 

[johnpoole]

your aud codes has to to with minor stuff, reg hung up, cdr record error.. mismatch reg table.. anytime you have flowing err codes you can get a restart due to cpu load. after 5 warms you get a cold, just the swithc saying thanks for not fix me.. i woud so test on all dtr's conf/tdr cpu's etc.. and i ususally check for phone type mismatch, digital sets built and not plugged in etc.. also make sure your cni's are not rls 15.. had a flyer a while back and had to change mine because 5 out of 6 were the bad rls. seems 14 in fine.. or 16+

john poole
bellsouth business
columbia,sc

 

[mikeyb123]

cheers John

I'll check the cni's. The switch is pretty tight as to whats configured and what's plugged in.

Have discovered thou tht we're way down on the patching levels and don't have the core symposium ones...........

am having a bad week... now have 2 vm ports that say they are aquired but won't work....grief with the mcdn links to india and a ITG that keeps giving one way tx.

I'm gonna switch it all off..count to 100 or have 2 pints and then switch it all on again..



It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.