Want to add set on MICS with PRI and program lines 2

[murphysmom]

Line Assigment is it the same as loops?

 

[MarvO1]

You will need to build and assign TARGET lines with the rec. digits coming from the PRI. Assign the target lines the same way as loop lines are assigned to sets.

MarvO said it

 

[murphysmom]

Where are the target lines?

 

[cook1082]

They start either at line 145 or 157.You have to build them.

 

[murphysmom]

I guess the "target" lines have already been set on some sets. I want to assign some of them to a new set.

 

[murphysmom]

Where do I find the REC. DIGITS

 

[murphysmom]

Figured it out by going to line assigment on new set and looking for the lines i wanted and app&ring

 

[curlycord]

Suggestions

Make Ring Only but assign 2 Intercoms.
Make Prime Set for that Line the same DN of the set.
Program OLI if you want to force out caller ID.



=----(((((((((()----=
curlycord

http://www.curlycord.com