Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Want oper or 0 to ring at all sets! 3
- Thread starter ddools
- Start date
-
1
- #2
- Thread starter
- #3
-
1
- #5
endlesswinter
IS-IT--Management
under line access, you will see answer dns.
Go into a set that you want to ring, look at line access, then next to answer dns, press show, enter operators extension, then set to appr and ring.
Go into a set that you want to ring, look at line access, then next to answer dns, press show, enter operators extension, then set to appr and ring.
serviceboy
Technical User
the 0 call will still follow set prog"call forward/hunt"
******6 months till ski season******
"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.
******6 months till ski season******
"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.
endlesswinter
IS-IT--Management
yes, if thats an issue use a hunt group
-
1
- #8
- Thread starter
- #9
- Status
Similar threads
- Locked
- Question
- Locked
- Question
