Wake up calls with ip500 / VMPRO 1

[trippercomm]

I saw an old thread about this subject but is now deleted.
I read that it works but never saw steps of how.
If anyone has insight, please advise.
Thnx
See old thread below

In IP office mode you need VMPro, it's build in where the guests can set an alarm time.
If you want more have a look here in this doc.

https://devconnect.avaya.com/public/download/dyn/NovaWEBHotelIPO.pdf

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[intrigrant]

It is quite simple.
Create a module named WakeMeUp and link a alarm action to the start point
Create a shortcode like SC=*99/TN="WakeMeUp"/Action=Voicemail Collect/LineID=0

Now dial *99 and you will be asked to enter the alarm time like 0715.
Then the next morning at 07:15 the phone which dialled the shortcode will ring and when answered you heare "This is a alarm call" or similar.

 

[TouchToneTommy]

http://www.tek-tips.com/viewthread.cfm?qid=1749729

 

[trippercomm]

Thanks, I will give that a shot.

 

[holdmusic34]

Can be monitored in vmpro> alarms.

Modify Alm09 wavfile in en folder to change the alarm message.




It doesn't get much worse.

 

[trippercomm]

Sorry so late to reply back....this worked great.
Thanks for the tips.

 

[holdmusic34]

Do you live on Ganymede?

I've been donating to support world hunger for years.
Then I found out they were feeding them.