Thanks in advance for your help.
Here is a snap of my network:
Intranet > FIREWALL > CISCO > Internet
My issue is trying to route packets through FIREWALL to the Internet. The FIREWALL (a W2k Server) has 3 NICs with IPs in the 63.x.x.x range. One NIC for Intranet and 2 for the CISCO (T1's). So far I have been unable to get packets from the Intranet to the Internet. I have tried manually adding routes, but it hasn't done the trick.
Is there an issue with having both the Internal and External interfaces with the same 63.x.x.x IP range?
The FastEthernet Cards on the CISCO are also in the same IP range.
Any help would be appreciated.
Here is a snap of my network:
Intranet > FIREWALL > CISCO > Internet
My issue is trying to route packets through FIREWALL to the Internet. The FIREWALL (a W2k Server) has 3 NICs with IPs in the 63.x.x.x range. One NIC for Intranet and 2 for the CISCO (T1's). So far I have been unable to get packets from the Intranet to the Internet. I have tried manually adding routes, but it hasn't done the trick.
Is there an issue with having both the Internal and External interfaces with the same 63.x.x.x IP range?
The FastEthernet Cards on the CISCO are also in the same IP range.
Any help would be appreciated.