I've been trying to get my Sun Ultra 10 to see an internal 200Gb
Western Digital IDE disk drive. Sun tried and couldn't help (after
upgrading the EEPROM), and Western Digital flat-out said "we don't
support Linux or Solaris".
I've tried to muck around with the format.dat:
disk_type = "WDC WD2000JB-00DUA0" : ctlr = ata : ncyl = 95768 : acyl = 2 : pcyl = 95770 : nhead = 16 : nsect = 255 : rpm = 7200
partition = "original" : disk = "WDC WD2000JB-00DUA0" : ctlr = ata : 2 = 0, 390725280
.....I now can get this far:
partition> pri
Current partition table (unnamed):
Total disk cylinders available: 95768 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wu 0 0 (0/0/0) 0
2 backup wu 0 - 95765 186.31GB (95766/0/0) 390725280
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
partition> label
Ready to label disk, continue? y
Warning: error writing VTOC.
Warning: no backup labels
Label failed.
partition>
...guess due to this error, the changes don't take effect, because when I go back
into format, I have a half-Gig drive again
Anyone know how (or if) I can fix this problem?
Thanks!
Randy
Western Digital IDE disk drive. Sun tried and couldn't help (after
upgrading the EEPROM), and Western Digital flat-out said "we don't
support Linux or Solaris".
I've tried to muck around with the format.dat:
disk_type = "WDC WD2000JB-00DUA0" : ctlr = ata : ncyl = 95768 : acyl = 2 : pcyl = 95770 : nhead = 16 : nsect = 255 : rpm = 7200
partition = "original" : disk = "WDC WD2000JB-00DUA0" : ctlr = ata : 2 = 0, 390725280
.....I now can get this far:
partition> pri
Current partition table (unnamed):
Total disk cylinders available: 95768 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wu 0 0 (0/0/0) 0
2 backup wu 0 - 95765 186.31GB (95766/0/0) 390725280
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
partition> label
Ready to label disk, continue? y
Warning: error writing VTOC.
Warning: no backup labels
Label failed.
partition>
...guess due to this error, the changes don't take effect, because when I go back
into format, I have a half-Gig drive again
Anyone know how (or if) I can fix this problem?
Thanks!
Randy