Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

vt520

Status
Not open for further replies.

felon

Technical User
Jul 3, 2002
63
CA
Our VT520 died and we purchased another used one.

I unplugged the old one and plugged the new one in and it won't display.

I plugged the old one back in and copied the setting down on paper and then set the new one up with the exact settings and it still won't work.

Does anyone know why it might not work? It just sits at a bare screen with a bar across the bottom saying ------------------------------printing done--------------------

Any help would be appreciated.

Thanks
 
tty port may be disabled. stat them in ld 37 from another tty port using your laptop
 
It's disabled. What's the command to enable it?

Thanks
 
That's what I thought, however, I forgot to put a space between the tty and #.

Thanks for your help on this phonedoc. It's is greatly appreciated.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top