VRS - PRI SV9100, SV8100

[aliomari]

Hello for all
I need a help to config VRS on PRI Trunks ,
I configured as DID to go to specific EXT (DDI table)and its OK , but when I choose some trunks to apply VRS on it (from 22-02), all trunks become under this inbound rule ,
the need is to operate VRS only on such trunks not all .
the case is with both SV8100 and SV9100.

 

[belevedere]

All trunks in a PRI are shared, or common. Calls are routed by the incoming DID digits. In 22-11 you can select VRS as the termination, however it will not be done by trunk, only by DID number.
22-11-05 - 400 = VRS, 501-599 = DISA/VRS message.