VPN WITH 4610

[mevo]

Hi,

I installed the specific firmware in the use of the mode VPN on a post 4610 and I try to connect it to my server S8720 via a firewall FORTIGATE but unsuccessfully.
I have three errors after every attempt of connection:



1er : IKE Phase 1 no response
Error code 3997700:0
Module : IKECFG:321

2e : IKE Phase 1 send notify
Error code 3997698:14
Module : NOTIFY:527

3e : IKE Phase 1 no response
Error code 3997698:0
Module : IKMPD:164

What is what somebody can say myself to what correspond these code errors.
Thank you
HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!


In french :

Bonjour,

J'ai installé un firmware spécifique à l'utilisation du VPN sur un poste 4610 et j'ai essayé de le connecter à mon serveur S8720 via un firewall FORTIGATE mais sans succès.
A chaque tentative de connexion , j'ai ces trois erreurs :

1er : IKE Phase 1 no response
Error code 3997700:0
Module : IKECFG:321

2e : IKE Phase 1 send notify
Error code 3997698:14
Module : NOTIFY:527

3e : IKE Phase 1 no response
Error code 3997698:0
Module : IKMPD:164

Est ce que quelqu'un sait à quoi correspond ces erreurs codes.
Merci d'avance....

A l'aide !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[siriussatelliteradio]

Fortigate is not a supported firewall for VPN Hard Phones.

Cisco Pix
Cisco VPN Concentrator
Juniper SSG
Avaya SG2XX
Nortel
Checkpointe

I believe those are the only supported appliances that can build the IPsec tunnel for the phone.

I have a VPN phone at my house and it connects to our Cisco concentrator and works great.

http://www.sirius.com

The Radio Revolution has begun....

 

[janni78]

You can connect the VPNRemote phone to any VPN router that supports IPsec using the genereic PSK profile on the phone.

I have this running on an Linksys.

Can't tell exactly what causes those messages though.

 

[chkbrt]

would you mind expanding with some detail on how you got it to work with a linksys? did you document this procedure? i would love to see this work on a cheap ipsec device. thanks