VPN using pptp & w2k need help!

[Guest_imported]

I have this set up in my PIX box...and I can can connect, and authenticate, and ping inside hosts via NETBIOS name or IP address. I cannot ping outside hosts from the VPN client, nor can I "browse" network neighborhood. Any ideas? Does this have something to do with default gateway check box? When I check/uncheck that, it just adds to the list of symptoms. BTW, a call to Cisco TS ended up as "There's a problem with your M$ network"....go figure...



access-list nonatinside permit ip 0.0.0.0 255.255.255.0 192.168.11.0 255.255.255.0

nat (inside) 0 access-list nonatinside

ip local pool vpdnpool 192.168.11.1-192.168.11.99

vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication mschap
vpdn group 1 client configuration address local vpdnpool
vpdn group 1 client configuration dns 192.168.1.4
vpdn group 1 client configuration wins 192.168.1.4
vpdn group 1 client authentication local
vpdn username cisco password cisco
vpdn enable outside

 

[tpcolson]

One more question.....I tried using the latest VPN client from Safenet, can connect, can ping clients on the inside and outside, but still can't browse network neighborhood.