Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VPN username on boot

Status
Not open for further replies.

teletechman

Technical User
Aug 27, 2008
1,685
US
I have a 9608 IP Phone set up for VPN use. Every time the phone reboots or re-registers the phone stops at VPN username=GroupVPN then I have to press the enter button. Is there no way to get this to be automatic and just log back in without a button stroke? I have it set up in the 46vpnsettings.txt file to remember it but must be missing something. Please let me know if you have a thought.
Mike
 
Here's the first few lines of a settings file that I set up that provided a solution to bypass that prompt on a configuration I did:

## VPN Settings for 96xx VPN Phones to work with Sonicwall Firewall
## VPN Mode=Enabled
SET NVVPNMODE 1
## Profile Password
SET NVVPNCODE 876
##VPN user name
SET NVVPNUSER XXX
## To Access VPN Procedure 2 View/Modify Mode
SET VPNPROC 2
## VPN Vendor Other
SET NVVPNSVENDOR 4

thought it might help to have something with which to compare...Z
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top