VPN username on boot

[teletechman]

I have a 9608 IP Phone set up for VPN use. Every time the phone reboots or re-registers the phone stops at VPN username=GroupVPN then I have to press the enter button. Is there no way to get this to be automatic and just log back in without a button stroke? I have it set up in the 46vpnsettings.txt file to remember it but must be missing something. Please let me know if you have a thought.
Mike

 

[TheZCom]

Here's the first few lines of a settings file that I set up that provided a solution to bypass that prompt on a configuration I did:

## VPN Settings for 96xx VPN Phones to work with Sonicwall Firewall
## VPN Mode=Enabled
SET NVVPNMODE 1
## Profile Password
SET NVVPNCODE 876
##VPN user name
SET NVVPNUSER XXX
## To Access VPN Procedure 2 View/Modify Mode
SET VPNPROC 2
## VPN Vendor Other
SET NVVPNSVENDOR 4

thought it might help to have something with which to compare...Z