VPN traffic from VPN client

[maggica68]

Hi ,
I'm trying to give the possibility to an user that is connected to a PIX 515e with a VPN tunnel started from a Pc with VPN Cisco client, to use a VPN tunnel site to site configured on this Pix for access some servers that are in another office.
Someone know if this is possible, because I can access from this Pc with the VPN tunnel the local resources that are direct connected to the PIX, but I can't or I am not able to use the second VPN tunnel Site to site for access the external resources.

Many thanks for your help
Sandro

 

[chicocouk]

It is not possible on PIX o/s version 6 or earlier, if both vpn tunnels terminate on the same interface (which is usually the outside interface) because the PIX will not redirect traffic back out the same interface it arrived on.

It is possible on version 7.

CCSP, CCNA, CCSA, MCSE, Cisco Firewall specialist, VPN specialist, IDS specialist

 

[maggica68]

I thinked that this was the trouble, but I wanted to be sure...

Many thanks for your help
Sandro

 

[lashboy]

Hey Sandro

I need to connect user from PC to connect with the help of cisco client to VPN tunnel ..I m using pix 501 .. can u please tell me how to setup a pix for cisco vpn client.. if u tell me commnads. plz


I also wana set ASA 5510 and VPN concentrator for same.....

 

[maggica68]

I don't have with me the Pix config, and this days I'm out of office. I can send the commands next Monday, if isn't too late..

 

[lashboy]

not its not too late..........please send