supportnet2be
IS-IT--Management
Hello i am having avery bizare problem,
i am setting up a vpn connection, as follows :
WINXP---->CISCO827ADSL---->INTERNET---->CORPORATE
i am using the windows XP VPN client to connect to my corporate server .
when i am using a normal modem (ALCATEL speedstoucvh pro etc ) i can connect without any porblems.
but when i connect my cisco router, it just dont work.
i have tried with cisco 827 ans cisco 837, it just wont work .
i started a configuration from scratch, it worked for some time, but then it just stopped, i switched my alcatel back and it worked, put cisco back again NOT WORKING.
here is my router config:
Building configuration...
Current configuration : 1166 bytes
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname VPN_RTR
ip subnet-zero
ip audit notify log
ip audit po max-events 100
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
ip nat inside
no ip mroute-cache
hold-queue 100 out
interface ATM0
bandwidth 1025
no ip address
no ip mroute-cache
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode auto
dsl power-cutback 1
hold-queue 208 in
interface Dialer0
bandwidth 1024
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
no cdp enable
ppp authentication chap callin
ppp chap hostname promau@tplus
ppp chap password 0 jema05
ip nat inside source list 8 interface Dialer0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
access-list 8 permit 192.168.1.0 0.0.0.255
scheduler max-task-time 5000
end
i am setting up a vpn connection, as follows :
WINXP---->CISCO827ADSL---->INTERNET---->CORPORATE
i am using the windows XP VPN client to connect to my corporate server .
when i am using a normal modem (ALCATEL speedstoucvh pro etc ) i can connect without any porblems.
but when i connect my cisco router, it just dont work.
i have tried with cisco 827 ans cisco 837, it just wont work .
i started a configuration from scratch, it worked for some time, but then it just stopped, i switched my alcatel back and it worked, put cisco back again NOT WORKING.
here is my router config:
Building configuration...
Current configuration : 1166 bytes
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname VPN_RTR
ip subnet-zero
ip audit notify log
ip audit po max-events 100
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
ip nat inside
no ip mroute-cache
hold-queue 100 out
interface ATM0
bandwidth 1025
no ip address
no ip mroute-cache
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode auto
dsl power-cutback 1
hold-queue 208 in
interface Dialer0
bandwidth 1024
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
no cdp enable
ppp authentication chap callin
ppp chap hostname promau@tplus
ppp chap password 0 jema05
ip nat inside source list 8 interface Dialer0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
access-list 8 permit 192.168.1.0 0.0.0.255
scheduler max-task-time 5000
end