VPN Server to VPN Server...

[Burninator]

Morning/Afternoon Ladies/Gents,

We have a Training Session coming up at a remote location. We have a Windows 2000 ISA/VPN server at our headquarters. What we want to happen is, at the remote training location we will have 6-10 laptops, and they will need to access to an application on a server at our headquarters.

I have a spare server at the headquarters that I can install Windows 2000 on. Can I use the RRAS on that server to create a VPN connection to headquarters, and have the laptops at the remote location access the application server without each laptop having to create and connect with a seperate VPN connection?

How would I do that? Just a simple explanation would greatly assist me.

Laptops
^
|
Remote Location--(Tunnel)-->ISA/VPN Server-->App. Server
VPN Server/Gateway

Thank you very much for your help!!

Jay

 

[ChicagoTechNet]

quoted form

http://www.chicagotech.net/

How to Setup A Site-to-Site VPN Connection

To setup a Site-to-Site VPN Connection , you may need to configure two windows servers for the Answering and Calling Routers. Here are the steps:

1. Run RRAS, on Configuration page, select LAN routing.
2. Configure VPN on the Answering Router
3. Configure the Demand-dial Interface on the Answering Router
4. Configure VPN on the Calling Router
5. Configure the Demand-dial Interface on the Calling Router
6. Confirm the Remote Access Policy Configuration on the Answering and Calling Routers


Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at

http://www.ChicagoTech.net

 

[rezeldazel]

robert, where can i find a much detailed VPN to VPN configurations. I have two Windows2k Server on different sites with RRAS enabled. I want to have a VPN connections.
Regards!