Hi All,
I need a little help with a config. I need to light this up in 4 hours.
I have at the remote end a user with a CISCO VPN Client 3.6.3. with a connection via a cable modem without a static IP. He has a W2K Pro notebook.
This has to connect thru to this office to a PIX 520 running 6.14 DES/IPSec. There is a 2600 running Version 12.2(12a)with FW Feature Set 3DES/IPSEC in front of the 520. He will untimately need access to his WK2 Server on his Enterprise. There are NO Certificates or AAA Server type severs available.
I was thinking that VPN with IPSEC would be a good way to go, but as always this is the place to ask the gurus.
Many Thanks.
I need a little help with a config. I need to light this up in 4 hours.
I have at the remote end a user with a CISCO VPN Client 3.6.3. with a connection via a cable modem without a static IP. He has a W2K Pro notebook.
This has to connect thru to this office to a PIX 520 running 6.14 DES/IPSec. There is a 2600 running Version 12.2(12a)with FW Feature Set 3DES/IPSEC in front of the 520. He will untimately need access to his WK2 Server on his Enterprise. There are NO Certificates or AAA Server type severs available.
I was thinking that VPN with IPSEC would be a good way to go, but as always this is the place to ask the gurus.
Many Thanks.