VPN Phone with Juniper router

[racom]

I have a VPN phone with Juniper router. It works great, but when you are on a call the phone loses connection at 17 minutes into the call. I thought I read something about a condition like this but I have not found it anywhere. We are running 4.2.11.

 

[tanderson3733]

In the ALG settings did you uncheck H323? Does the phone unregister or just the call drop?

 

[kwing112000]

Does it have something to do with the lifetime on the VPN?

Kevin Wing
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[sjjan]

I also have a 4610sw phone sitting ready in India that needs to be connected to a IPO sitting behind a SPEEDTOUCH ADSL router here in the Netherlands.

I ordered a seperate phone/ADSL line and am about to order a Juniper router.

Any tips or suggestions? My Avaya supplier doesn't know how to handle this and so I need to try it out myself.

Is there any user from The Netherlands that has experience and is willing to help setup?

 

[racom]

I need to access the router to check. Unfortunately they locked down the router and I need to have them let me back in.

sjjan - I had a hard time finding a document that would cover the Juniper. In fact I found a couple that did not work. Go to Avaya.com, you can search for this document IPO-JUN-SSG5.doc . This was a great resource.

 

[racom]

ALG H323 was unchecked. I believe it unregister's. I saw it happen once.

As for the lifetime, I couldn't find which one to change. I would have to create a new P2 Policy. The default timers for the P2 Policy is 3600 seconds (60 minutes).

Any ideas?

 

[JayNEC]

Creating a new P2 policy is not a big deal, just assign all the same parameters and change the 3600 seconds to something larger. I used 4 days I think?
Then change it in the VPN setup. You won't need to touch the phone at all.