VPN Phone jumping 2 tunnels

[V98Cubes]

I have setup a VPN set via a Sonicwall and the set works fine. The problem I have is the two IPO 500's that are networked together and can call to and from each site BUT the VPN phone try's to call the IPO500 which it is not directly connected to I see the call complete but user only hears dead air. Anyone out there ever tried this before. These are NOT dedicated T1's just plain old Internet pipes.

Thanks
BIGV

 

[jamie77]

IP routes from your VPN terminator to the remote IPO

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Football is not a matter of life and death-It is far more important!!!!

 

[tlpeter]

Jamie is right
Dead air is a routing problem


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[bobbdeep]

BIGV,

Disable "allow direct media path" on the IP extension and enable it on the IP lines between sites.

Bobbdeep

 

[jamie77]

Or put the correct routing tables in the routers!

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Football is not a matter of life and death-It is far more important!!!!