vpn no established tunnel

[raggdgu]

the connect with software vpn client is good, the login is accept but no does make the tunnel vpn.


no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh 208.223.102.8 255.255.255.255 outside
ssh 98.195.162.52 255.255.255.255 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
console timeout 0
vpdn group telmex request dialout pppoe
vpdn group telmex localname 9383842448
vpdn group telmex ppp authentication pap
vpdn username seamardime password *********
dhcpd auto_config outside
!

!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
group-policy seamarmexico internal
group-policy seamarmexico attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value seamarmexico_splitTunnelAcl
default-domain value seamar.local
username proser password 8yGm27U5TSj/pscA encrypted
username proser attributes
vpn-group-policy seamarmexico
username admin password f3UhLvUj1QsXsuK7 encrypted
tunnel-group seamarmexico type ipsec-ra
tunnel-group seamarmexico ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:c22110cac3626b0cb218861c26b03714
: end
ciscoasa# config t
ciscoasa(config)# no aaa authentication ssh console LOCAL
ciscoasa(config)# aaa authentication ssh console LOCAL
ciscoasa(config)# exit
ciscoasa# sh run
: Saved
:
ASA Version 7.2(3)
!
hostname ciscoasa
domain-name asa
enable password 4s.fJHw1C4ktM0Y3 encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
dns server-group DefaultDNS
domain-name asa
access-list puertos extended permit tcp any interface outside eq 3389
access-list puertos extended permit udp any interface outside eq 3389
access-list puertos extended permit tcp any interface outside eq 5800
access-list puertos extended permit tcp any interface outside eq 5900
access-list seamarmexico_splitTunnelAcl standard permit any
access-list inside_nat0_outbound extended permit ip any 192.168.2.192 255.255.255.192
pager lines 24
logging buffered informational
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool poolclients 192.168.2.210-192.168.2.240
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 3389 192.168.2.2 3389 netmask 255.255.255.255
static (inside,outside) udp interface 3389 192.168.2.2 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 5800 192.168.2.2 5800 netmask 255.255.255.255
static (inside,outside) tcp interface 5900 192.168.2.2 5900 netmask 255.255.255.255
access-group puertos in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa authentication ssh console LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh 208.223.102.8 255.255.255.255 outside
ssh 98.195.162.52 255.255.255.255 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
console timeout 0
vpdn group telmex request dialout pppoe
vpdn group telmex localname 9383842448
vpdn group telmex ppp authentication pap
vpdn username seamardime password *********
dhcpd auto_config outside
!

!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
group-policy seamarmexico internal
group-policy seamarmexico attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value seamarmexico_splitTunnelAcl
default-domain value seamar.local
username proser password 8yGm27U5TSj/pscA encrypted
username proser attributes
vpn-group-policy seamarmexico
username admin password f3UhLvUj1QsXsuK7 encrypted
tunnel-group seamarmexico type ipsec-ra
tunnel-group seamarmexico ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:c22110cac3626b0cb218861c26b03714
: end
ciscoasa#

 

[andrewis]

Your address-pool on the tunnel-group is missing

tunnel-group seamarmexico general-attributes
address-pool poolclients


Rather change your VPN address pool to a pool off your local subnet remembering to change your split-tunnel too.

 

[andrewis]

apologies I meant your nat0 not your split-tunnel

 

[raggdgu]

ok,i cleaned all configuration of vpn and i do configurate of new , now works fine but the problem is that when i connect the vpn, the internet down

 

[andrewis]

If you want internet access via a split-tunnel change your ACL to the following.

access-list seamarmexico_splitTunnelAcl standard 192.168.2.0 255.255.255.0

 

[andrewis]

I left off "permit" use the following..

access-list seamarmexico_splitTunnelAcl standard permit 192.16.2.0 255.255.255.0

 

[andrewis]

arrg I left an 8 off now!!


access-list seamarmexico_splitTunnelAcl standard permit 192.168.2.0 255.255.255.0

3rd time lucky

 

[raggdgu]

this fix, the error is that a technical changed the password

:S