VPN Client config for a 506e 1

[Warmon]

Hello all I need help,

I am new to the PIX, when I started working here we had a sonicwall pro200 and just upgraded to a pix.

I had to get a fellow tech to help me with my original setup of the pix out of the box for a setup config, and he showed me the basics for setting up point to point (firewall to firewall) connections, I have reset-up our point to points with no problems but now I have to allow and setup vpn client access to a couple of our servers behind this pix and I have NO idea what commands this entails.

I have browsed through 10 or so pages and found a basic vpn access config posted here but I am sure thats for a different pix and not a 506e.

Can anyone post a basic vpn client access config for a 506e or help a new pix tech get this process started?

Thanks in advance.

 

[gregbeason]

What type of Client VPN would you like? PPTP or Cisco VPN 3000 IPSec client. The config for all PIXs are the same.

 

[Warmon]

We only have a pix and no vpn concentrator so I think I need a ipsec config.

 

[StomII]

Hello,


Should the central PIX act as >>EZVPN<< Server and the cisco VPN Client 4.x on remote side? With auth do you like to use: preshared key or do you like to use certificates?


NTBH
Marcus

 

[Warmon]

I would like to use a preshared key.

 

[StomII]

Hi Warmon,


Try this link:

http://www.cisco.com/en/US/products...s_configuration_example09186a00801e71c0.shtml

NTB,
Mrcus