I recently upgraded my win2k server to win2k3. I did this because I was having trouble with my workstations being ablt to access the internet and using vpn. Basically I have 1 server connected to the internet and 2 workstations connect via a switch to the server. The server has two nics. NIC1 goes to internet and NIC2 goes to switch. I cannot seem to get NAT to give out ip's to the two workstations and the NIC2 on the server. What I am doing wrong. I follow what the wizard asks me for. Will NAT give out the ips or do I need to make the WS static and add routes and stuff. Please help thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VPN and NAT setup help win 2K3
- Thread starter Gold3nMan
- Start date
DylanThompson
IS-IT--Management
You might want to look at setting up a DHCP server to issues address to the LAN clients. This would be the better way to go.
I like children. If they're properly cooked.
-- W.C. Fields
I like children. If they're properly cooked.
-- W.C. Fields
- Status
Similar threads
- Locked
- Question