VPN 3000 Concentrator

[MackMasterson]

Hello. Hoping you can help with my VPN

I have a VPN 3000 Concentrator on a Win 2K network. We are using Cisco VPN client 4.0. Most of the time, everything workss great, but then there are time no one can gain access. The username and password box comes up 3 times, then it disconnects. The only fix I have found is to turn off the hardware and turn it back on. The only cause I have found so far is if someone is connected to the VPN and disconnects from the VPN incorrectly(powers off their PC, etc.)

Any ideas???

 

[SitetoSite]

Set up one-to-one nat between the users and the remote peer.

 

[themut]

I came accross this problem once, I was assigning IP address pools directly on the VPN groups:

Configuration | User Management | Groups

I change my pool assignments and configure a global pool instead:

Configuration | System | Address Management | Pools

that modification resolved the issue and I never came accross this proble again. By the way, I am running code 4.1.5