VOIP

[stevomorrison]

I have 2 VOIP issues
The systems are a BCM 400 4.0 and a BCM 50 2.0. Both have MCDN licenses on them and are patched up to date.
1. I could not get the VOIP working until I took out the send name display under the ip gatway settings on the BCM 400. When I have the box checked I can call from the 50 to the 400 but when calling from the 400 to 50 it disconnects.
2. The VOIP works fine with h.323 trunks with the CSE protocol but when I use SIP it will not work until i make the gateway protocol none.

Any ideas would be great

 

[acewarlock]

To use SIP you need a SIP Lic at both ends for each trunk you want to have.

 

[stevomorrison]

Do you mean SIP license. I have gateway licenses at both ends. I have SIP working at another location with the same setup with no problems and i didn't purchase a SIP license there.

 

[exVoIP]

A VoIP GW Keycode should do both SIP and H323.

A SIP keycode can only do SIP