Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VoIP with Qos

Status
Not open for further replies.

secureinc

Technical User
Feb 18, 2002
34
US
I have a full T-1 connection between sites. Both sites are running VoIP. The routers I am dropping in are 1721 with T1 WIC cards. What commands would I use to give VoIP priority with the bandwidth that I have. Thank you!!!!!!
 
Hi secureinc,

In a simple configuration, you can use "ip rpt priority 16384 16383 xxx" where xxx is the bandwidht you would like to priorize. I don't know what kind of codec you are using to say a secure amount of bandwidht to use.

BTW, you can go to and search for voip qos without login.

Good luck!
[]s
Jeff
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top