VoIP with Qos

[secureinc]

I have a full T-1 connection between sites. Both sites are running VoIP. The routers I am dropping in are 1721 with T1 WIC cards. What commands would I use to give VoIP priority with the bandwidth that I have. Thank you!!!!!!

 

[jrzardo]

Hi secureinc,

In a simple configuration, you can use "ip rpt priority 16384 16383 xxx" where xxx is the bandwidht you would like to priorize. I don't know what kind of codec you are using to say a secure amount of bandwidht to use.

BTW, you can go to

http://www.cisco.com

and search for voip qos without login.

Good luck!
[]s
Jeff