Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VOIP Question

Status
Not open for further replies.
drew41238

drew41238

MIS
Nov 28, 2007
56
US
Is there a way to setup a Norstar MICS to dial out through a VOIP account like Vonage or Broadvoice with a gateway? If so, how is it done. Can you point me to some directions or info on something like this? Thanks.
 
Sort by date Sort by votes
The VoIP carrier should be able to give you dialtone via a modem. Then just take that Dialtone and put it to a trunk port on the MICS.
 
Upvote 0 Downvote
The VoIP carrier might refer to the modem though as an ATA. Connect the "phone" port on the ATA to the line in on a DS card and you're good to go.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jason_l_sherman
  • Locked
  • Question
Nortel phone question
Replies
2
Views
116
jason_l_sherman
jason_l_sherman
SVdP
  • Locked
  • Question
Nortel BCM50 to VOIP system
Replies
1
Views
103
curlycord
curlycord
telllman
  • Locked
  • Question
Flash 2 Nortel Question
Replies
6
Views
146
curlycord
curlycord
jsaad
  • Locked
  • Question
CICS Call Pilot multi mailbox question 1
Replies
3
Views
95
jsaad
jsaad
MontrealSoft
  • Locked
  • Question
External call transfer questions
Replies
9
Views
245
MontrealSoft
MontrealSoft

Part and Inventory Search

Sponsor

Back
Top