I have Tow sites, each of them has a BCM50a switch with the following key cods:
VOIP GW Trunk 2
IP Client Seat 1
NCM BCM50a/e 1
Int analog Set 2
MCDN Try-Buy 1
Q.SIG Try-Buy 1
Each site has its own static real IP address (ADSL Line).
Required: connecting these 2 sites through VOIP.
What we have done? We created VPN in both sides, so we can Ping and Telnet both of them. Also we follow the procedure in the document and programmed the 2 systems.
The problem is: we can't establish a voice call between the tow switches