VOIP Gateway

[lockster]

Hi,
Anyone know if its possible to pass VOIP calls to a 3640 with a BRI (WIC). I have seen many examples on CCO using BRI VIC and voice ports?
dial-peer voice 23 pots
destination-pattern 9123
port 0/0 (the BRI VIC) can this also be a standard BRI WIC.

Im hoping to use the 3640 as a gateway on a callmanager to handle external calls.

Thanks in Advance

 

[BuckWeet]

Nope, need the VIC because of the DSP resources on it..


BuckWeet

 

[tbilan]

And the VIC has to be plugged into a NM-2V not the normal NM-1E-2W. The NM-2V has the DSPs.
Tom Bilan
TJBA, Inc.
CCNP, CCDP, MCSE & CNE

 

[BuckWeet]

Err yea, he's right, heh.. Forgot to mention that..


BuckWeet

 

[lockster]

Thanks guys, looks like im going to have to spend some money on my home lab, these voice modules arent cheap even on ebay.

 

[congogrey]

If you are building a home lab i would go with two 1750-V routers (they come with 1 VIC slot) put a VIC-2FXO (for the PSTN) in one and the VIC-2FXS (for analog phones) in the other. Would not need anything more and would be much cheaper.

 

[jfrelin]

I have an extra NM-2V with VIC-2FXS in it if you are interested.. just laying around collecting dust. be happy to let it go fairly cheap. Let me know. jfrelin@nexusglobal.net