Voice Mail System Problem 1

[AZOldDog]

I am trying to link a series of COT trunks to a Meridian Mail Voice Mail system.

My problem is that the incoming trunks present as (for example)7004-17 7777. Each line will present the ACOD for the Route plus Member number (7004-17) but they all present DN 7777.

I tried separate TKID with no effect and tried to use Manual DN but that requires CLS: MIA to be set. Naturally that CLS is not allowed for a COT trunk!

Anyone have any idea how I can connect these trunks to the corresponding Voice Mail box?

Route is
ROUT 2
DES COX 1
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
DTRK NO
PTYP ACO
AUTO NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 7004
CPP NO
TARG 03
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
TFD 0
LEXT 100
SST 3 0
NEDC ETH
FEDC ORG
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR NO
MUS NO
MR NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0

Thanks
Old Dog

 

[tgolds]

In the route you need to type Yes to AUTO then it will ask for DN, type in the DN.
Make sure the DN is programmed and hunting and forwarding to voicemail.

 

[KCFLHRC]

tgolds is correct but the Auto terminate DN is actually set on each trunk. Set the route to Auto = yes then at the ATDN prompt in each trunk set it to 7777 if that is where you want it to terminate.

 

[tgolds]

Thanks KC, it's been a while on that one.

 

[AZOldDog]

Thanks a Ton KC. That was the ticket!