Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

voice call button 1

Status
Not open for further replies.

phonedude17

Technical User
Oct 11, 2007
81
US
Is there anyway to make the default setting on a BCM 3.7 for voice call? In other words, when they hit the dss button it will voice announce the call without having to go through the extra step of hitting the voice call button first.
 
Not that I'm aware of. Common question that I've yet to hear a solution to.

Adversity is Opportunity
 
what exactly are u trying to do ? paging could be programmed as a single press command direct to a zone, would this help eg Feature611 etc ? Mailbox paging in vmail for ccr tree's and mailboxes could also be used , in rel 4 bcm and rel 3 bcm50 service codes could acces these .

j
 

No, not possible to have a dss button do the voicecall for you.You have to press voice call button then hit the dss button.
No workaround.
 
Almost sounds like you could have a programmed dss button stuck and it voice calls that ext. as soon as feat.66 is activated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top