Vmpro one group leave module disappear

[sq12345]

Hi guys. Today I meet a very strange vm pro problem. I had one group and use its leave module to control the rings. This leave module's start point directly connects to my night greeting module. This group worked fine before. But today this group leave module disappear suddenly. Rightnow I add again. Could you guys know how this happen in vm pro? Thanks guys.

 

[amriddle01]

Only seen such things when Remote Desktop is used, which should never be used on VM pro machines

http://www.ipoffice.tel

 

[jamie77]

Somebody deleted it by mistake?!?!?!?

Jamie Green

Football is not a matter of life and death-It is far more important!!!!

 

[amriddle01]

In fact also seen it when you try to name a module the same as a group, again can't/should not be done

http://www.ipoffice.tel

 

[tlpeter]

Amriddle, when you have a module with the same name then it should go to that group when vmpro is not working.


BAZINGA!

I'm not insane, my mother had me tested!

 

[amriddle01]

I know, but the group mailbox disappears and so you can't manipulate it

http://www.ipoffice.tel

 

[sq12345]

Is it possible to use phone to make this issue? Because my customer do not touch the vm pro.

 

[piethief]

Did you recently upgrade? I had all group start points disappear after a customer tried to upgrade to a version they weren't licensed for, and I had to downgrade to get back online and reprogram all group start points.

 

[kwing112000]

I had one do this the other day. I created a bunch of modules and recordings. we shipped it to site and half the modules were missing. they didnt overlap with anything on the system. this was newest r7

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries