VM Pro running on Windows 2008 SBS will not answer calls (outside AA or internal extension VM) The service starts and I can login to the VM Pro client, the IPO IP is listed on the top left. It never displays the groups or users like it should. I have disabled windows firewall. My call route is pointed to VM:checkConditions (like all other systems I have installed) It is like IPO and VM Pro are "kinda" sync'd but not completely. Any help would be appreciated. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VM Pro will not answer external or internal calls 1
- Thread starter clindsay1
- Start date
holdmusic34
Vendor
Get visual voice running first. Work on that.
Check your vmpro is at the same release as your ipo. If not, then do so.
No more monkeys jumping on the bed.
Check your vmpro is at the same release as your ipo. If not, then do so.
No more monkeys jumping on the bed.
intrigrant
Systems Engineer
Reset security settings and check firewall.
amriddle01
Programmer
Yes, the DNS or DHCP service will have pinched the port VM Pro uses, there is a command line entry you can add to stop it happening. Search this site and you'll find it 
-
1
- Thread starter
- #6
amriddle01
Programmer
Cool, but give it a few weeks and if it is running DHCP and/or DNS you may well find it stops working again unless you reserve the ports
- Status
Similar threads
- Question
