Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VM Pro not syncing new changes.

Status
Not open for further replies.

DanielRobertsDNS

Programmer
Jan 23, 2017
5
AU
Hi all,

I have a client who has recently upgraded 3 sites to R10, and when we try to make changes to one of the sites VM Pro call flow it will not hold any changes. It continually uses the old call flow. New modules will not work either, but all the ones around before the upgrade work.
They are currently using a distributed Voicemail set up and 2 of sites will change fine no dramas at all.
I have checked the in-dials, forwarding and all settings related to distributed setup of voicemail. I have restarted services, rebooted IP office and also rebooted the server where the VM pro client is installed.
Any other things I have missed and should be looking at?

Regards
Dan
 
This is not a SCN but 3 seperate sites?

"Trying is the first step to failure..." - Homer
 
try and taking the distributed ones offline and see if your changes will then take. Maybe there is something feeding back that is not playing nice

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top