Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VM Ports 1
- Thread starter Avaya802
- Start date
-
1
- #2
- Thread starter
- #3
Greybeard191
Technical User
what jamie77 is referring to is the maximum number of vm ports supported by the module itself...
40 when running VM pro only
20 when running VM pro + OneX
GB
40 when running VM pro only
20 when running VM pro + OneX
GB
C110 Unified Communications Module
This card is supported for IP Office Release 8.0 and higher. The card is an embedded server that allows Linux based IP Office applications to be run within the IP Office control unit rather than requiring a separate PC. The IP address of the server is set during its initial configuration and can then be changed through web browser access to the server.
• Supports
Voicemail Pro and or one-X Portal for IP Office applications. The card is not supported by systems running in IP Office Basic Edition mode.
• IP Office Users: Up to 200 users when running Voicemail Pro and one-X Portal for IP Office. More than 200 users when running just Voicemail Pro.
• Simultaneous one-X Portal for IP Office Users: 50.
• Maximum voicemail ports: Up to 20 ports when running Voicemail Pro and one-X Portal for IP Office. Up to 40 ports when running just Voicemail Pro.
• Small Community Network: Maximum 6 systems.
• Licenses
The presence of this module acts as an automatic Preferred Edition license for the IP Office system, enabling 4 ports of voicemail. Additional voicemail ports can be licensed. A separate Essential Edition license is still required as a pre-requisite.
• IP500 Control Unit:
• IP500 V2 Control Unit: IP Office Release 8.0 Q1 2012 Service Pack or higher.
• Maximum per Control Unit: 1 per control unit.
• IP500 Trunk Card Support:
• ! WARNING
When removing an C110 Unified Communications Module, care should be taken not to touch the heat sink on the card. The heat sink remains hot for a long period after the system or card shutdown.
Ports
• LAN
This port is currently not used.
• USB
These USB2 ports can be used for the temporary of devices during module maintenance. USB memory keys should be USB 2.0 compatible.
• HDMI
This port can be used for temporary connection of a video monitor during card maintenance.
• Micro SD
This port can be used as the source for files during card maintenance.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
This card is supported for IP Office Release 8.0 and higher. The card is an embedded server that allows Linux based IP Office applications to be run within the IP Office control unit rather than requiring a separate PC. The IP address of the server is set during its initial configuration and can then be changed through web browser access to the server.
• Supports
Voicemail Pro and or one-X Portal for IP Office applications. The card is not supported by systems running in IP Office Basic Edition mode.
• IP Office Users: Up to 200 users when running Voicemail Pro and one-X Portal for IP Office. More than 200 users when running just Voicemail Pro.
• Simultaneous one-X Portal for IP Office Users: 50.
• Maximum voicemail ports: Up to 20 ports when running Voicemail Pro and one-X Portal for IP Office. Up to 40 ports when running just Voicemail Pro.
• Small Community Network: Maximum 6 systems.
• Licenses
The presence of this module acts as an automatic Preferred Edition license for the IP Office system, enabling 4 ports of voicemail. Additional voicemail ports can be licensed. A separate Essential Edition license is still required as a pre-requisite.
• IP500 Control Unit:
• IP500 V2 Control Unit: IP Office Release 8.0 Q1 2012 Service Pack or higher.
• Maximum per Control Unit: 1 per control unit.
• IP500 Trunk Card Support:
• ! WARNING
When removing an C110 Unified Communications Module, care should be taken not to touch the heat sink on the card. The heat sink remains hot for a long period after the system or card shutdown.
Ports
• LAN
This port is currently not used.
• USB
These USB2 ports can be used for the temporary of devices during module maintenance. USB memory keys should be USB 2.0 compatible.
• HDMI
This port can be used for temporary connection of a video monitor during card maintenance.
• Micro SD
This port can be used as the source for files during card maintenance.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
- Status
