VLANs on Cisco 3500 Switch

[jerrysafety]

I'll try to keep this brief. I've got a Cisco Catalyst 3500 switch. I have an Access Point in port 13 which in on VLAN 20. That AP pulls its IP from our Gateway, and that part is working fine. The AP itself also has a VLAN setup on it because I want the users to pull from a differnt scope of IPs. I cannot get the users to get an IP address from the AP. Port 13 is setup for VLAN Access, how can I set it up for trunking the VLAN info from the AP. I was able to get this working with ZyXEL switches, just not with Cisco. Any help would be great. Thank you.

 

[LawnBoy]

Doubleposted to a Cisco forum.


--
The stagehand's axiom: "Never lift what you can drag, never drag what you can roll, never roll what you can leave.

 

[jerrysafety]

Is that bad?

 

[LawnBoy]

It's not against posting poicies, no. But we can ignore your problem since you already have it posted in the most appropriate forum.

BTW, the "cisco guy" who hangs out in this forum is the same guy who's answering you in the other.


--
The stagehand's axiom: "Never lift what you can drag, never drag what you can roll, never roll what you can leave.

 

[jerrysafety]

I did post this one in the wrong forum, sorry about that. I appreciate the heads up, thanks