VLAN trunks on PIX 515 unrestricted running 6.3

[scarabza]

i've just acquired 2 515's (both unrestricted running 6.3(3).

i'd like to use them to segment 6 vlan's on 4 3548xl catalyst's using 802.1q trunks. is this possible?

thanks in advance!

 

[BuckWeet]

yes its possible with 6.3

 

[scarabza]

fantastic! can you give me an example config so that i can play around with it and get an idea how it works. it's the first time i'm playing with a pix, the software is slighty different than i'm used to.

thanks again!

 

[BuckWeet]

your command is

interface hardware_id vlan_id logical

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#1075586

 

[scarabza]

boy i'm stupid. i played with that cmd, but i was using a vlan id that i created/aliased. i didn't specify 'vlan1 vlan2 etc.'

 

[scarabza]

does the pix use VTP? i've created the logical vlan interfaces on the pix, is the pix able to ping an ip allocated to the induvidual vlans?