Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Visual Vector work on G3r r. 11?

Status
Not open for further replies.

Irvineguy

MIS
Feb 7, 2006
191
US
What switch release version do I need to run Visual Vectors?

 
Irvineguy,

visual vectors run on cms, not on switch. r11 will be fine.
 
I installed Visual Vector r. 11 and tried to connect to the CMS server.

I put in the CMS server IP address and my login info. However I geat a "cannot find server" error.

I doubled check and the CMS server IP address is correct.

Any ideas?
 
Irvineguy,

besides cms server itself you need to install visual vectors server side software on the cms server. it is optional and is not installed by default. you can find it on one of the disks that came with cms server.
 
Ok thank you.

Is installing Visual Vectors on the CMS server fairly simple?
 
Irvineguy,

afair it's pretty straightforward but if any complications arise, post here. maybe i'll remember something.
 
Is this an extra service that I have to purchase? The Visual Vectors that is.
 
Irvineguy,

afair visual vectors do not require any license.
 
I had some issues getting VV to work. You may want to look at the following post for some information:

thread690-1172944

- Stinney

Favorite all too common vendor response: "We've never seen this issue before.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top