Virtual Superloop

[centrait]

I am using TM to manage the switch, added a new analog card to the switch. Now when I try to build on the card it gives me the error: Etherset have to be defined on a Virtual Superloop, so I know that TM does not see the card as a Superloop. Does anyone know where I input this info in TM so it will see the card?

 

[janaya]

What type of system do you have? What card slot are you trying to use?

 

[Firebird Scrambler]

It will be in LD 97

For Phantoms on the older CS1000M it's

Loop number for providing Phantom DN's on a Option 11c V04.00
The example Port numbers used are TN's 61 0 - 61 15


LD 97
REQ CHG
TYPE SUPL
SUPL N96

REQ PRT
TYPE SUPL
SUPL

SUPL SUPT SLOT XPEC0 XPEC1

000 STD LEFT 01 0 1 -- - - (1-4)
004 STD LEFT 02 0 1 -- - - (5-8)
008 STD LEFT 03 0 1 -- - - (9-12)
012 STD LEFT 04 0 1 -- - - (13-16)
016 STD LEFT 05 0 1 -- - - (17-20)
032 STD LEFT 06 0 3 -- - - (21-24)
036 STD LEFT 07 0 3 -- - - (25-28)
040 STD LEFT 08 0 3 -- - - (29-32)
044 STD LEFT 10 0 3 -- - - (33-36)
048 STD LEFT 09 0 3 -- - - (37-40)
064 STD LEFT 11 0 3 -- - - (41-44)
068 STD LEFT 12 0 3 -- - - (45-48)
072 STD LEFT 13 0 3 -- - - (49-50)
096 ---- ---- PHANTOM -- - -
108 VIRTUAL CARDS 73 - 76 93 - 96
112 VIRTUAL CARDS 77 - 80 97 - 99
128 STD LEFT 32 0 1 33 2 3
132 STD LEFT 34 0 1 35 2 3
136 STD LEFT 36 0 1 37 2 3
140 STD LEFT 38 0 1 39 2 3
144 STD LEFT 40 0 1 41 2 3
148 STD LEFT 42 0 1 43 2 3
152 STD LEFT 44 0 1 45 2 3
156 STD LEFT 46 0 1 47 2 3


SUPL 96 100 104 108 112

TN SLOT No 61 - 64 65 - 68 69 - 72 73 - 76 77 - 80
(Virtuals) 81 - 84 85 - 88 89 - 92 93 - 96 97 - 99

For virtual loops, use e.g.

LD 97
REQ CHG
TYPE SUPL
SUPL V108 etc

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[centrait]

Thanks, got it