Virtual Office and Phantom 500s - What am I missing?

[FoneChick]

I'm trying to set up Virtual Office and phantoms on an Opt 81C.. They work fine as I2004 sets, but when I program them as phantom 500s - I must be missing some stuff because I'm getting "Invalid ID (2)" Message when I try logging the phantom in... Your help is appreciated!!!!

Here's the programming:

DES DHVIRT
TN 128 0 00 01 PHANTOM
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 4729 0 MARP
CPND
NAME DERRICK HAZEL
XPLN 13
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 5000
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 0
LNRS 16
XLST
SCI 0
SCPW 144729
CLS CTD DTN FBD XFD WTA THFD FNA HTA ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 12
FTR DCFW 4 5000
DATE 12 JUN 2007

 

[mklein76]

In the features for phantom 500 I don't see any options for virtual office. I'm assuming you cannot use virtual office with phantom phones probably because of the type of TN phantoms use...but I could be wrong.

Matt
Forex Capital Markets
CS 1000E VoIP/Symposium Admin

 

[captaingadget]

I may be wrong but I dont believe virtual office is available for 500 sets.

 

[Klowndog]

I don't see anything in the NTP's for 500's and virtual office.
even printing info section in NTP doesnt show any reference:
REQ: PRT Print data block for the requested terminal types).
LTN List Terminal Numbers of the requested terminal type(s).

TYPE: xxxxx Enter appropriate telephone model where xxxxx:
3903V = M3903 Virtual Terminal.
3904V = M3904 Virtual Terminal.
3903H = M3903 Host Terminal.
3904H = M3904 Host Terminal.
TNB Note 1: The only telephone types of the M3900 Series that can be
configured as a Virtual or Host Terminal are the M3903 and M3904.
Note 2: The Print TNB and List TNB requests always show the
logged-off TNB data.I n logged-in state, an indication of the
logged-in TN (“HOST TN” or “VIRTUAL TN”) is added.

 

[FoneChick]

thanks all