ViewPlus 2 1

[Lele22]

Hi all I have a question anyone know a ViewPlus2? it's a program for management a Pr&OR.pom file you can say the tree, bundle and association. I tray this program in demo version I want know a price you can hal me?

 

[viperman6012]

I don't have a price for this product, but I can tell you a similar product which you can find at

http://www.hagi-online.org/pomview

--> and this is freeware!

 

[Lele22]

Thanks more Viper I tray thet program and is ok, I donwload dthe ias coverter but.... dont go....the conversion I listen a file but dont have enable a botton for convrsion...thanks more again
I have another questionbut the sopho can be a gatekeper in a ntework voip?

 

[viperman6012]

You can not use the SOPHO directly, you have to use the Innovaphone gateway.

 

[Lele22]

ok I understand you need created a CCITT A-law sorry

 

[Lele22]

thanks viper, sorry for my question but i like more sopho..
I enable a Ip management with chprof command
I cant use a telnet if have a mml file on CPU?
the command Exping answer me Always is not aviable in this moment try after.... but dont go..
Thanks again

 

[viperman6012]

When using a telnet session you don't have mml available. You have to use SMPC or OM-Terminal from Mgmt@Net. To get a connection via IP you must have a CPU3000 with a valid IP-Address (check with DITCPC). Then you must use OM-commands CHPROF and CHIPPR to define a profil. Hope this helps you!

 

[Lele22]

Ok I have a SMPC 5.0 and Ip go very vell, I asked if possible with hyper terminal for funny, Now I play with a Pom View it's fantastic...you can converted in html....fantastic if you have a question..I used a sopho like ibrid pubblic switch and like pbx for my custumer....
But now I stay in relase 810.29.o I dont have Dsheet, or FCO, I dont say if for 810.30 I need AM 3000 or another module of ram....if You Can answerme
P.s Sorry for My english

 

[viperman6012]

To be honest I don't understand your question. Normally an AM3000 is an add-on processor for the CPU. So this is used for pbxs with very very heavy traffic and maybe for big callcenters. In standard installations you will not need it.

 

[Lele22]

Sorry Viper.
In this time I dont have a specification for compatibily Pk of CPU
810.29.0 is 2.896kb no need a ram and go well
I dont say If install a 810.30 or up what I need?
with 810.30 the new function are.....
Thanks