VHST Traffic Printouts

[telepath9465]

I have a customer, he's trying to pull traffic data from the history. The traffic parameters are properly programmed in LD 2, and I've seen the traffic printout occur while I've been in the PBX. This of course occurs because trf is turned on for TTY 0 which is attached to the modem. This is an Option 11 Release 21.43. Another thing I've noticed, when I print AHST in LD 22, I don't see the traffic printouts in the history. Additionally there is a traffic buffer of as shown below.
REQ PRT
TYPE ADAN

ADAN HIST
SIZE 65000
USER MTC TRF SCH BUG
ADAN TRF
SIZE 65000
ADAN TTY 0
CARD 00
PORT 0
DES DIALUP
USER MTC TRF SCH
XSM NO

The goal is to print traffic data at the end of the day instead of logging in and printing traffic data in LD 2. Any help would be greatly appreciated... Also see example traffic data

.INVC 0 2
0000 TFC002

000
003 CO

00007 00007

0000002 00008
0000001 00001
00000 00000
00000

004 CO

00003 00003

0000000 00000
0000000 00000
00000 00000
00000

006 DID

00008 00008

0000001 00005
0000000 00000
00000 00000
00000

007 CO

00003 00003

0000000 00000
0000000 00000
00000 00000
00000

009 CO

00001 00001

0000000 00000
0000000 00000
00000 00000
00000

010 MUS

00001 00001

0000000 00000
0000000 00001
00000 00000
00000

 

[HungryHouse]

Hey man,

This is a data networking forum..not a telephony forum.

Your message would better be asked in the CS1000 forum:

http://www.tek-tips.com/threadminder.cfm?pid=798

or the BCM forum.

http://www.tek-tips.com/threadminder.cfm?pid=1361

This forum is for Nortel data product questions.

Real trouble call:
Customer: "I have a huge problem. A friend has put a screensaver on my computer, but every time I move the mouse, it disappears!"