I am trying to program a ring down on a VG-224 gateway so that when I go off-hook that it calls a designated area. I have made a PLAR , Partition, A CSS and Translation Pattern. I can call from my analog phone by dialing the number, but I want it perform automatically. This is going to be used for call boxes in a parking deck. Any help would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
VG-224 ringdown
- Thread starter jhill803
- Start date
You say you made a PLAR, what do you mean by that? You don't have to set the FXS port as a PLAR, CallManager with he CSS, Xlation pattern will do that for you.
I can't paste the link, Google Cisco ringdown phone and look at the sample configuration.
Hotdial on IP Phones with CallManager Configuration Example
I can't paste the link, Google Cisco ringdown phone and look at the sample configuration.
Hotdial on IP Phones with CallManager Configuration Example
Silverblade
Technical User
How you can make this work:
- Create a new partition for the plar
- Create a CSS with the new partition in it
- Create a "empty" translation pattern in the new partition. And select the CSS where in the "to be dialed" number exists
- Let this "empty" translation translate to the desired number you want to call.
- Put you gateway port and the directory number on this portin the plar CSS.
Hope this will solve your problem
- Create a new partition for the plar
- Create a CSS with the new partition in it
- Create a "empty" translation pattern in the new partition. And select the CSS where in the "to be dialed" number exists
- Let this "empty" translation translate to the desired number you want to call.
- Put you gateway port and the directory number on this portin the plar CSS.
Hope this will solve your problem
Find the IP address of the VG by looking up the extension in the gateway.
Start/run/cmd
telnet "IP Address"
enter your user name and password for the VG.
Conf t
sccp plar
voiceport 2/X (port number on VG of the extension for ringdown) dial X (numbner to ringdown to)
crtl C
wr
exit
to remove
no voiceport 2/X dial
Start/run/cmd
telnet "IP Address"
enter your user name and password for the VG.
Conf t
sccp plar
voiceport 2/X (port number on VG of the extension for ringdown) dial X (numbner to ringdown to)
crtl C
wr
exit
to remove
no voiceport 2/X dial
- Status