I just installed 9.1 on Win2K professional. The machine has 1GB memory and an 80GB disk. When I run a backup either locally or of a remote system, I get about 350 MB/min using backup-to-disk and about 150 MB/min writing to tape. These figures seem very poor. Is this normal for BE 9.1 on Win2K professional?
During the tape backup, the number of "soft write errors" exceeded 20,000. Is this normally a software/driver problem or a hardware problem?
Thanks,
John
During the tape backup, the number of "soft write errors" exceeded 20,000. Is this normally a software/driver problem or a hardware problem?
Thanks,
John