You'll have to forgive me for not having a technical reply to your question, but we have Definity v10, being monitored with CentreVu Supervisor v9, and operate Verint 'Ultra' call recording. All works very sweetly.
If you have any specific questions on set-up, etc, email me at mark.thomas4@thepensionservice.gsi.gov.uk and I'll get the answers for you
I currently have a G3si connected to a Verint Ultra system. My t1's run through the Verint system then into the PBX. This way, we monitor all calls. ASAI is the middleware for the PBX.
Any system which monitors the T1s with Verint or others (we use Witness) will be limited to calls which go via external trunks. Therefore no internal only calls will be monitored.
Some suppliers have tried to get around this using agent observe in addition to T1 monitoring. This uses up lots of internal resources within the Definity.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.