Verify Raid 5 on S8800

[Hudson22]

How can I verify raid 5 on an S8800. I did check the server in putty with the command raid_status -v. But what exact output from that command tells me I'm at raid 5? Is it just that their is 3 HDD and thats it?
thanks in advance,
Hudson22

 

[AvayaTier3]

raid_status -n (check number of hard disks)
raid_status -n -v (check hard disk status, verbose)
raid_status -n -s (check hard disk status, short)
raid_status -s (check short drive data)
raid_status -p -v (check array status) Builds MegaSAS.log in current directory
raid_bbu_check -d
raid_bbu_hdl_alms


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[Hudson22]

Thanks for the response Brett,
But still looking at the output and I can't decipher whether its raid 5 or not.
Any further suggestion is appreciated.
thanks,
Hudson22

 

[AvayaTier3]

Did you login to the maintenance browser?
Diagnostics
Raid Status

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[Hudson22]

Same output as command line. No exact detail saying raid 5 is in place.
thanks,
Hudson22